Product number | Voltage | Time to layer short when a motor is locked |
Over run amount | |||
---|---|---|---|---|---|---|
with open brake | With short brake | |||||
(V) | (min) | CW | CCW | CW | CCW | |
TG-87A | 12 | 5.5 | 41.9 | 43.5 | 5.3 | 5.4 |
TG-87B | 24 | 5 | 48.5 | 47.9 | 5.6 | 5.6 |
TG-01F | 24 | - | 15.6 | 14.3 | 1.8 | 1.8 |
TG-01G | 24 | 4.5 | 47.2 | 44.9 | 3.6 | 3.5 |
TG-01H | 12 | 5.8 | 42.8 | 40.2 | 4.6 | 4.5 |
TG-201A | 24 | - | 26.8 | 25.7 | 2.4 | 2.4 |
TG-201B | 24 | 5.5 | 49.2 | 46.1 | 3.6 | 3.4 |
TG-47A | 24 | - | 7.1 | 7.2 | 1.5 | 1.5 |
TG-47B | 24 | - | 17.4 | 17.3 | 2.5 | 2.5 |
TG-47C | 24 | 16.5 | 27.1 | 27.2 | 3.8 | 3.8 |
TG-47C | 12 | - | 6.5 | 6.2 | 2 | 1.9 |
TG-70A | 24 | - | 37.8 | 38 | 3.5 | 3.5 |
TG-05J | 24 | 5.3 | 25.7 | 26.2 | 2 | 2 |
TG-05K | 24 | 1.2 | 51 | 51.6 | 3.9 | 4 |
TG-05L | 12 | 15 | 15.6 | 15.7 | 2.8 | 2.8 |
TG-05L | 24 | 0.5 | 88.5 | 90.3 | 6.6 | 6.9 |
TG-05P | 12 | - | 16.8 | 163 | 2.8 | 2.8 |
TG-05P | 24 | 6 | 85.2 | 85.8 | 7.1 | 7.1 |
TG-05R | 12 | 2.5 | 42.6 | 42.5 | 3.2 | 3.2 |
TG-301A | 24 | 8 | 44.4 | 44.6 | 5.3 | 5.3 |
TG-06D | 12 | 3.5 | 49 | 50.2 | 5.9 | 6 |
TG-06E | 24 | 4.8 | 51 | 48.6 | 3.9 | 3.6 |
TG-85B | 12 | 3.75 | 18.6 | 17.2 | 2 | 1.9 |
TG-85C | 24 | 3 | 20.2 | 20 | 1.7 | 1.6 |
TG-85E | 24 | 1 | 42.9 | 40.9 | 2.7 | 2.5 |
TG-57A | 24 | 3.8 | 37.1 | 36.8 | 2.6 | 2.5 |
TG-30P | 24 | 0.4 | 35.8 | 35.9 | 1.8 | 1.8 |
TG-30S | 24 | 0.5 | 41.2 | 41.8 | 2.4 | 2.4 |
TG-401A | 24 | 2 | 17.3 | 17.9 | 1.8 | 1.8 |
TG-21Q | 24 | 0.5 | 33.9 | 33.8 | 1.7 | 1.8 |
TG-21R | 12 | 94 | 55.6 | 57.8 | 3.7 | 3.8 |
TG-77A | 24 | 4.5 | 30.5 | 30.4 | 1.2 | 1.2 |
TG-78A | 24 | 4 | 23.9 | 24.9 | 1 | 1.1 |
TG-22A | 24 | - | 5.6 | 5.7 | 0.4 | 0.4 |
TG-22D | 12 | - | 14.5 | 15.6 | 0.9 | 0.9 |
TG-58B | 24 | 6.5 | - | - | - | - |
TG-58C | 24 | 1.7 | - | - | - | - |
TG-55A | 12 | - | 13.7 | 13.6 | 0.6 | 0.6 |
TG-55A | 24 | 21.5 | 13.7 | 13.6 | 0.6 | 0.6 |
TG-55B | 12 | - | 29.5 | 29.6 | 1.3 | 1.3 |
TG-55B | 24 | 2.25 | 29.8 | 29.9 | 1.3 | 1.3 |
TG-55C | 12 | 15 | 46.2 | 46.2 | 2.3 | 2.3 |
TG-55C | 24 | 0.5 | 46.1 | 46.7 | 2.3 | 2.3 |
Item | Conditions | Description |
---|---|---|
Time to layler short when a rotor is locked | ・Ambient temperature 20-30℃ ・Power supply capacity 20A ・Rated voltage |
When a motor is overloaded and the rotor is locked, the heat generated from the motor becomes higher and it melts insulation film of the winding. It causes short circuit between the winding. That is called layer short. |
Over run amount with open brake | ・Rated voltage ・Motor alone (without gear) |
Overrun means that the rotor of a motor rotates for a certain time by inertia after the power is turned off. There is a way to stop the overrun instantly by making short between motor terminals when power is turned off. This is called short brake. Be aware that short brake shortens life time of motor brushes because it uses a generator action of a motor and current value temporarily gets high. |
Over run amount with short brake |
Contact Us
Please feel free to contact us for inquiry about our products.
+81-3-5340-0331"
Mon-Fri JST 9:00-17:00
*Except national holiday in Japan